Wiring an ADR BTR to a 9 Pin RS232 PC PORT

SINGLE DROP - STAR WIRING

RS232 Serial Port Cable
FEMALE cable plug

mates with

PC DB9 pin Male COM

connector

  MALE cable plug

mates with

AMI J3 DB9 pin Female

connector

COM Port pin signal Direction BTR J3 pin signal
3 TX 2 RX
2 RX 3 TX
5 GND 5 GND
1 DCD jumper1  
4 DTR
6 DSR
8 CTS

Notes:

  1. The ADR BTR only uses 3 RS232 signals - do not connect any signals to the pins not listed for AMI J3.
  2. Be sure RS232 jumper is in place and RS422 jumper 422 is removed.
  3. Software may require jumper1 on the PC end of the cable (4pins shorted together):