Wiring an ADR BTR to a 25 Pin RS422 Port |
Cable drawing:
RS422 Serial Port Cable | ||||
FEMALE cable plug
mates with RS422 25 Pin Male Connector |
MALE cable plug
mates with AMI J3 DB9 Pin Female Connector |
|||
DB25 pin | Signal | Direction | J3 pin | Signal |
19 | TD(A) | IN to BTR | 1 | RX+ |
25 | TD(B) | IN to BTR | 4 | RX- |
7 | FR.GND | - | 5 | GND |
15 | RD(A) | OUT of BTR | 6 | TX+ |
17 | RD(B) | OUT of BTR | 9 | TX- |
Notes:
Be sure the RS 422 jumper is in place and RS 232 jumper is removed.
The Wire type must be twisted shielded pairs.